中文简体
日本語
русский язык
Deutsch
한국어
ភាសាខ្មែរ
lately, Many corporate users consult us for soft water, Soft water is widely used in industry, Steam boiler, Hot water boiler, swapper, Water air conditioning and other make-up water softening, And hotels, Office building, Apartment and other domestic water and laundry, Printing and dyeing, Chemical and other soft water treatment. today, I will introduce the principle and operation process of soft water to you, To understand how it turns hard water into soft water, And what materials need to be used.
The First Champion-Home central water softener
How do you tell if it's soft water or hard water first?
The hardness of water is generally divided into 6 level:
1, 0-0. 5GPG As soft water
2, 0. 5-3. 5GPG For Microsoft Water
3, 3. 5-7. 0GPG It is medium hard water
4, 7. 0-10. 5GPG Hard water
5, 10. 5-14. 0GPG For very hard water
6, 14. 0GPG This is very hard water
(The hardness of most tap water is 8-14GPG among)
next, We will introduce the operation of water softening equipment.
1. Operating principle:
filtration: At a certain water pressure (0. 15-0. 5Mpa) Under the, Raw water flows through a distributor into a resin filter bottle. In the process, Ion exchange generation, Na Cations with water (Ca, Mg2, Fe2) Make an exchange, So you get soft water. Water softens through the lower distributor, Outflow through the central tube, Connect to various water points.
Champion king home water softening equipment-Filter effect
backwashing: First use or after a period of time, Need to flush equipment. The first thing to enter is the backwash state, Water flows through the upper distributor into the central pipe, Then it flows out of the lower distributor, Backwash from bottom to top. Backwashing serves two purposes: One is to loosen the pressed resin layer, It is conducive to the full contact between the resin particles and the regeneration liquid. The second is to clean the suspended matter and suspended matter attached to the surface of the resin, Prepare for the next step of resin regeneration. Backwash time is about 10 About minutes.
Salt uptake: During the resin cleaning process, The role of water softening salt is to help resin reduction and regeneration, Restore its function. Automatic salt absorption through the filter valve head, Inhale the softened brine into the filter bottle, Bring the brine into full contact with the resin. To prevent the water from mixing with the regenerated liquid, The washing speed was less than or equal to the flow rate of the regenerated liquid. This process takes about 60 minutes, It's called a salt-sucking slow wash.
Normal washing: Water needs a certain pressure through the water distributor into the filter bottle, Rinse the newly regenerated resin, Until you rinse it off. Generally speaking, If the water pressure is sufficient 10-20 About minutes.
Water replenishment: finally, Fill the salt box with water, Wait for the next use to complete the filtration process. This is how water softening equipment works.
2. Soft water in the use of precautions:
1. Soft water installation should be close to the sewer, To reduce the distance of wastewater transport.
2. The salt tank shall be installed in a convenient position for adding salt, To meet the demand for supplemental recycled salt.
3. The water softening equipment that supplies water to the boiler should be installed at a distance from the boiler 3 Meters away from the location, Prevent high temperature damage to the equipment.
Champion king home water softening equipment-Application scenario
4. Winter should pay attention to equipment insulation, To prevent equipment from freezing damage. Temperature recommendation in 1℃to 49℃among, Keep away from acidic substances and the environment, To protect equipment.
5. Salt should be added regularly, To ensure the normal operation of the softening function.
6. Ensure the stability of input voltage and current, Prevent the power supply from dampness and device failure.
7. Check the air tightness of the jet and the salt suction pipe regularly, To ensure the normal operation of the equipment.
