中文简体
日本語
русский язык
Deutsch
한국어
ភាសាខ្មែរ
Many customers who use groundwater or mountain springs will find that the water quality is poor, But it's impossible to describe exactly what the problem is. today, I will walk you through the water quality issues you face, And provide the corresponding water treatment equipment solutions, To solve the problem you have encountered.
Many users have called us for inquiries, said: "My water is bad, It's uncomfortable to use, So want to see what filter equipment is right for us" , For general household customers, It is not usually considered to send your own water source to a water quality testing centre for testing, For one thing, testing costs money, It is also because the location of the testing facility is not known. In addition, These households use water mainly for daily life, So they don't want to spend too much time and money on testing.
Today I will teach you some simple methods of identification. Usually we do it by looking, smell, Try these methods.
look: The first case, High degree of turbidity and impurity content. This water usually contains leaves, sediment, Small worm eggs, etc. These impurities can be seen by the naked eye through the use of sand cans or bag filters, PP Cotton and other physical filtration methods to remove.
Second case, The water turns yellow after leaving it for a while. This is usually due to excessive iron ions in the water. To solve this problem, A manganese sand filter is needed to remove iron. When the iron content is too high, Manganese sand filter also need to be equipped with aeration device, Let the iron ions oxidize fully before filtering, The effect will be better.
The third case, The water looks clean, After boiling, some small white particles float on the surface. This is a very high level of calcium and magnesium in the water. To reduce scale production, Water softening equipment is required. The resin can adsorb calcium and magnesium ions in water, Thus achieve the effect of reducing scale. If the unit requires a large amount of domestic or industrial water use, Consider adding an appropriate amount of scale inhibitor to the water, To further reduce the production of scale.
Second hearing: Some customers have reported a bad smell in the water, To better deal with the problem, We need to understand the specific taste of the odor. Such as, It smells like mud, Rust or something else. Different tastes may represent different sources and solutions. If the smell is heavy, Try using activated charcoal to reduce odors. however, If you want to eliminate the odor completely, The source of the odor in the water needs to be tested, Then take corresponding measures to solve the problem.
Three tastes: Casual tasting is not recommended before tasting, The safety of the water must be ensured first. Some customers report that the water has a salty or bitter taste, This may have something to do with the geology of the water source, Could be salt land, The proximity to the coast causes the water to back up, Or the effects of groundwater formations in the western interior. In this case, Customer needs detection TDS value, Determine whether it is brackish or brackish water. This type of water has a larger scale, To eliminate the saltiness, Reverse osmosis equipment is recommended, However, the reverse osmosis equipment needs to be installed before the water softening equipment. The cost of treating this water quality is high, You are advised to replace the water source or customize the filtration device based on the actual situation.
Today, we mainly introduced how to simply distinguish different water quality, And when is it appropriate to use soft water. But here's the caveat, Not all water sources are suitable for installation of water softening equipment, Therefore, when choosing water treatment equipment, we must choose according to the actual water source.
